Olympus Guide on how to capture fireworks photos

Share

GetOlympus (Click here) published a guide on how to capture brillant fireworks photos.

Here’s a rundown of common adjustmentsmade in the Fireworks Scene Mode:
Shutter speed is set to four seconds, which helps capture the streaming trails of the fireworks.
Sets the ISO to 100 and the f-stop to f11.
Sets the White Balance to 5300K.
Sets the exposure compensation to -1.0 EV. This is a full 1-stop underexposure to keep the firework highlights from burning out.
Sets the color to Vivid, the Saturation to High and the Contrast to Hard, all of these changes help enhance color.
Sets the Sharpness to Soft, which uses minimal sharpening in anticipation of post-processing.

Share

**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links.

As an Amazon Associate I earn from qualifying purchases

Back To Top

Looks like your ad blocker is on.

×

We rely on ads to keep creating quality content for you to enjoy for free.

Please support our site by disabling your ad blocker.

Continue without supporting us

Choose your Ad Blocker

  • Adblock Plus
  • Adblock
  • Adguard
  • Ad Remover
  • Brave
  • Ghostery
  • uBlock Origin
  • uBlock
  • UltraBlock
  • Other
  1. In the extension bar, click the AdBlock Plus icon
  2. Click the large blue toggle for this website
  3. Click refresh
  1. In the extension bar, click the AdBlock icon
  2. Under "Pause on this site" click "Always"
  1. In the extension bar, click on the Adguard icon
  2. Click on the large green toggle for this website
  1. In the extension bar, click on the Ad Remover icon
  2. Click "Disable on This Website"
  1. In the extension bar, click on the orange lion icon
  2. Click the toggle on the top right, shifting from "Up" to "Down"
  1. In the extension bar, click on the Ghostery icon
  2. Click the "Anti-Tracking" shield so it says "Off"
  3. Click the "Ad-Blocking" stop sign so it says "Off"
  4. Refresh the page
  1. In the extension bar, click on the uBlock Origin icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the uBlock icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the UltraBlock icon
  2. Check the "Disable UltraBlock" checkbox
  3. Marque la casilla de verificación "Desactivar UltraBlock"
  1. Please disable your Ad Blocker

If the prompt is still appearing, please disable any tools or services you are using that block internet ads (e.g. DNS Servers).